PROTECTION, ENGINEERED AS ONE.EQUIPMENT, IN CONTEXT
The right component.
Part of a complete system.
Understand what each equipment group does, where it belongs and what an engineer checks before selecting it. Browse by system, then open only the details you need.
Not sure where to begin? Use the project advisor →18 equipment groups · selected for your project
Landing valvesProvide a controlled connection for a firefighting hose.
Where it fits
Accessible hydrant outlets and building risers for trained responders.
Understand the complete systemWhat determines the specification
- Required flow and residual pressure
- Hose connection compatibility
- Accessible installation and pressure rating
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Hose reels & assembliesMake a water delivery assembly available at the designated response point.
Where it fits
Areas where water-based first response is appropriate and an escape route remains available.
Understand the complete systemWhat determines the specification
- Hazard suitability and coverage
- Hose reach and storage
- Water supply and inspection requirements
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Pipes, valves & accessoriesDistribute water with provisions for isolation, drainage and testing.
What determines the specification
- Hydraulic calculation and pressure rating
- Corrosion exposure and supports
- Isolation strategy and identification
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Automatic sprinkler headsAn individual heat-responsive sprinkler opens when its operating temperature is reached.
Where it fits
Areas covered by a design appropriate to occupancy and hazard.
Understand the complete systemWhat determines the specification
- Hazard classification and discharge characteristics
- Temperature rating, response and orientation
- Spacing, obstructions and manufacturer requirements
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Sprinkler control assembliesProvide control, monitoring and the applicable alarm arrangement for a zone.
What determines the specification
- Wet, dry or other engineered arrangement
- Valve supervision and alarm interfaces
- Drainage and maintenance access
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Waterflow & test devicesIndicate water movement and support planned functional tests.
Where it fits
Sprinkler zones with coordinated alarm and drainage provisions.
Understand the complete systemWhat determines the specification
- Device compatibility and alarm timing
- Test and drain arrangement
- Safe discharge and accessible test points
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Smoke & heat detectorsDetect selected fire indicators and report them to the alarm system.
Where it fits
Rooms and circulation areas with sensing suited to the environment.
Understand the complete systemWhat determines the specification
- Smoke, heat or specialist sensing suitability
- Ceiling geometry and nuisance alarm risks
- Panel compatibility and maintenance access
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Fire alarm control panelsIdentify device signals and manage configured alarm outputs.
Where it fits
Monitored positions supporting an agreed response procedure.
Understand the complete systemWhat determines the specification
- Addressable or conventional architecture
- Capacity, standby power and fault monitoring
- Documented cause-and-effect and interfaces
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Manual alerts & notificationAllow people to raise an alarm and help occupants recognise the need to respond.
Where it fits
Escape routes and occupied areas under the notification design.
Understand the complete systemWhat determines the specification
- Accessible call-point locations
- Audibility, visibility and accessibility
- Compatible circuits and power supplies
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Portable extinguishersProvide hazard-matched equipment for trained first response when safe.
Where it fits
Identified fire risks with accessible equipment positions.
Understand the complete systemWhat determines the specification
- Fire class and extinguishing medium
- Electrical and cooking-oil limitations
- Placement, inspection and servicing
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Exit signs & emergency lightingHelp people identify escape directions during normal and power-failure conditions.
Where it fits
Escape routes, changes of direction and designated exits.
Understand the complete systemWhat determines the specification
- Viewing distance and route continuity
- Backup duration and illumination
- Testing access and power arrangement
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Cabinets & equipment identificationProtect designated equipment while keeping it visible and accessible.
What determines the specification
- Equipment dimensions and ready access
- Environmental exposure and mounting
- Clear identification without obstructing operation
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Engineered suppression assembliesDeliver an extinguishing medium selected for a defined special hazard.
Where it fits
Critical rooms or processes following a hazard-specific assessment.
Understand the complete systemWhat determines the specification
- Agent suitability and occupied-space safety
- Enclosure conditions and discharge calculations
- Warning, release and maintenance requirements
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Kitchen suppression systemsProtect specified cooking appliances and extraction areas.
Where it fits
Commercial cooking hazards after appliance and hood assessment.
Understand the complete systemWhat determines the specification
- Appliance layout and nozzle coverage
- Compatible extinguishing medium
- Manual actuation and coordinated energy shutoff
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Release controls & interfacesCoordinate the engineered warning and release logic.
Where it fits
Special-hazard systems with a documented cause-and-effect strategy.
Understand the complete systemWhat determines the specification
- Detection confirmation and release logic
- Occupant warning and safety interlocks
- Manufacturer compatibility and verification
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Main fire pump setsProvide calculated water flow and pressure to the network.
Where it fits
Projects requiring a dedicated fire-water pumping arrangement.
Understand the complete systemWhat determines the specification
- Calculated duty and performance curve
- Driver arrangement and redundancy
- Suction conditions, access and test provisions
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Pressure-maintenance pumpsMaintain normal pressure for minor losses; they do not replace a main fire pump.
What determines the specification
- Pressure-maintenance duty
- Coordinated start/stop settings
- Isolation, non-return and control arrangement
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Pump controllers & test arrangementsControl the designated pump and enable performance checks.
What determines the specification
- Driver compatibility and controls
- Status signals and fault monitoring
- Safe test discharge and instrument access
Make, model, ratings and approvals are confirmed against the project. This is a selection guide, not a manufacturer datasheet.
Selection starts with your site.
Final quantities, ratings, brands and documentation depend on the agreed design and selected manufacturer. Mercury can discuss appropriate equipment and available technical documents for your requirement.
Request a site survey